Categories

False alarms and system glitches can be aggravating, and even more concerning, may prevent your home’s security from working how it should. Thankfully, most troubles, from dead batteries to false alarms, are easy to fix. Take a look at our tips for troubleshooting your home alarm system in Beaumont. We’ll help you keep your family safeguarded and your system operating as it should.

Test Your Home Security System In Beaumont

One effective way to troubleshoot your home’s security is to test it yourself! Newer systems let you place them in test mode to avoid initiating an emergency response. After switching to test mode, do the following:

• Activate your system as you normally would when you leave.
• Open a window or door that has a contact sensor, or test other devices. Shut the door or window once you’re done so it doesn’t trigger the alarm as you reactivate the system.
• Permit the alarm to sound for 60 seconds to make sure a signal is dispatched to the security company and an entry is created in the alarm activity log.
• Proceed to test sensors as needed
• Review the system activity log to verify proper function.

Don’t worry, monitoring specialists will be aware that your alarm system is involved in a test. Just be sure to switch out of test mode when done. It’s a good idea to test monthly or anytime you make changes to your home’s internet or phone connectivity.

Inspect The Placement And Condition Of Motion Sensors

Although an essential aspect of your alarm system, motion sensors are prone to false alarms. You can help prevent them with a few simple troubleshooting steps.

• Conduct a physical inspection. Is there something that could move within the sensor’s detection zone, like drapery caught in a breeze?
• Is the sensor covered in dust? Cobwebs, dirt, and debris can cause issues. Ensure the face is clean.
• Does the motion detector come with pet immunity you can activate? Some models can be programmed to ignore pets up to 100 pounds.
• When was the battery last replaced? A nearly depleted battery can impact performance or lead to false alarms.
• Is a heat source impacting the sensor? Excessive heat from sunlight or a fireplace can cause an alarm.

Keep Batteries On Hand And Look Out For Low Battery Warnings

One of the great things about new home security systems is that they’ll tell you when batteries are getting low. If your system has a control panel or mobile app, you’ll usually discover notifications there. Depending on the alarm, you might hear an intermittent beep when batteries are running out. 

Contact sensors, motion detectors, smoke detectors, and other wireless tools have batteries that need to be replaced every 1 to 2 years. It’s a good idea to keep batteries around and establish a replacement schedule. Top systems also include a rechargeable backup battery for the central control panel. This backup battery helps keep your system operating if you lose power and should recharge once the electricity is working again. If it doesn’t recharge, you should replace it.

Troubleshooting Is Easy With ADT Home Security In Beaumont 

As the top name in home security, ADT builds systems that offer unrivaled functionality and protection. Accessing test mode is easy through the ADT+ app or MyADT.com, and you’ll always be sent alerts when a battery is low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system perfectly suited to your Beaumont home and family. Call (409) 207-0852 or submit our form today!